Eventide Eclipse User Manual page 20

Eclipse User Manual
grams. To prove it, load the program CombDelays . Should you peek back
at the LFO's (T_RATE) , you'll find it hasn't changed.
Now go to the area and set (M_COMB) to 0 % .
HOT KEYS
To assign the modulation block's LFO to this parameter, hold down its
soft key until the page shown to the right appears.
Select <MODULATE> and then set (SOURCE) to LFO#1 . Trippy!
You can change the depth of the effect with .
(SCALE)
To disconnect modulation, simply set back to .
(SOURCE) off
see page 40 for
more information about patching parameters to the modulation block
Eclipse User Manual Page 18 of 64 Release 2.500