Upgrade Via The Oupdate Application - Eventide Eclipse User Manual

Upgrade via the OUpdate Application

1. Using your web browser, download the update application from the Eventide website (e.g.,
"eup2000.exe"), and save it to your computer.
2. Power down the Eclipse.
3. Connect a 9-pin "straight-through" Male-Female serial cable (Radio Shack p/n 26-117) between your
PC serial port and the Eclipse serial port.
4. Start the OUpdate application (double-click on its icon), downloaded in step 1.
5. While holding down the
ware Update Utility Awaiting Contact
6. If you have not connected the Eclipse to the COM1 port on your PC, you may need to use the "OUp-
date Setup" button to change the COM port. You should not change the default settings of 115200
baud, 8 data bits, 1 stop bit, and no parity.
7. press the Send button in the OUpdate application.
8. Wait until both the Eclipse screen and OUpdate application indicate that programming has been com-
pleted.
9. Power down the Eclipse. You're done...
When you next restart the Eclipse, it will ask you if you want to clear the setup, i.e., return the system to factory settings. You
should say OK to this, and prepare yourself for the task of re-entering such SETUP values as you have changed.
Eclipse User Manual
Eclipse User Manual
key on the Eclipse, power up the Eclipse. You should see
2
.
Page 54 of 64
Eventide Soft-
Release 2.500