Polycom KIRK Wireless Server 500 User Manual page 9

6. Press √ to confirm the ID number.
7. Press √ to confirm the AC Code and the system number (Each handset can be subscribed to 4
different systems). The display will show " SUBSCRIPTION WAIT " while the handset logs
itself on to the system. A long tone indicates that the subscription has succeeded.
8. In the left corner of the display an antenna symbol
handset has been subscribed to the KIRK Wireless Server 500.
4.3 Entering the Extension Number
To allocate an extension number to the handset:
1. Press the MENU key.
>
2. Press the key until " EXT. Service " appears in the display.
3. Press √. The menu will now show " CLIP-Stack ".
<
4. Press key until "Read/Write user data" appears in the display.
5. Press √. The Serial Number of the MASTER Handset will now appear in the display.
6. Press √. Enter the extension number of the user of the handset.
7. Press √.
8. Press the MENU key to return to standby mode.
Right after this, the handset has to be turned off (by pressing and holding down the √ key) and
then on again. The extension number appears in the display.
The first subscribed Handset is the MASTER Handset, i.e. you are now able to configure further
handsets to the system via this handset.
4.4 Registration of Additional Handsets via the Master Handset
To register additional handsets via the MASTER Handset, the MASTER Handset has to "allow
subscription" for each handset by registration of the serial number(s) of the new handset(s) on
the system.
The MASTER Handset:
1. Press the MENU key.
>
2. Press the key until " EXT. Service " appears in the display.
KIRK Wireless Server 500 with CLIP – User Guide - 14096500-HD, Ed.8
will appear indicating that the
8