Polycom KIRK Wireless Server 500 User Manual page 28

With clip

Hide thumbs Also See for KIRK Wireless Server 500:

9.0 Repeater Programming via the ServiceTool on a PC

9.1 Installation of the ServiceTool on Your PC

This software, ServiceTool, is available from

www.kirktelecom.com/Installer/suk149.asp

as a

zipped file.

1. Unzip the file to a new directory.

2. Run the setup.exe file from the new directory.

3. Follow the on-screen instructions for installing the ServiceTool.

9.2 Connecting a KIRK Repeater for Programming

The KIRK Programming Kit for repeaters includes a phone socket double adapter

and a serial cable.

The serial cable incorporates special components,

DO NOT USE ANY OTHER SERIAL CABLE.

1. Use the double to connect the serial cable to the KIRK Repeater in parallel with the power

supply connector. Ensure that the power supply is on.

2. Connect the serial cable to the PC on which the ServiceTool is installed.

Mains adapter

Modular adapter

Serial cable

9.3 Configuration of a KIRK Repeater

1. Start up the ServiceTool application.

KIRK Wireless Server 500 with CLIP – User Guide - 14096500-HD, Ed.8

Need help?

Do you have a question about the KIRK Wireless Server 500 and is the answer not in the manual?