Polycom KIRK Wireless Server 500 User Manual page 31

10.0 KIRK Wireless Server 500 CLIP (FSK)
Relevant for KIRK Wireless Server 500 CLIP - supporting CLIP (only FSK Bell 202).
10.1 Ring delay adjustment
If FSK is sent between 1.st and 2.nd ring signal - a ring delay has to be set to avoid the
KWS500CLIP to detect the first ring signal.
Note: Default value is set to 4 seconds.
Procedure for ring delay adjustment:
1. Ring delay value is written in ms.
Eg. 1000 ms=1 sec. ring delay.
2. Be aware that this ring delay is active on both external and internal calls.
If a parallel corded phone is connected directly to the same extension the first ring on the
DECT phone will be delayed compared to the corded phone.
3. Power reset of KWS500CLIP has to take place – to activate the CLIP functionality again.
Information will be prompted by the CCFP Administration Program.
10.2 Transparency of the CLIP functionality
If KWS500CLIP is in one of the following modes the CLIP functionality is disabled.
1. Command Mode (Diagnostic, Command Mode)
2. Dump Mode (Restore of User data)
KIRK Wireless Server 500 with CLIP – User Guide - 14096500-HD, Ed.8 30