Polycom KIRK Wireless Server 500 User Manual page 22

8.0 Programming Handsets by Use of the
Administration Program on a PC
You will need the Administration Program to program the KIRK Wireless Server 500 via this
method. The program can be downloaded from
8.1 Installation of the Administration Program on Your PC
1. Unzip the file to a new directory.
2. Run the setup.exe file from the new directory.
3. Follow the on-screen instructions for installing the Administration Program.
4. Launch the program to get all the files copied.
5. Start the Administration Program and follow the instructions to complete the installation.
8.2 Starting the Administration Program
Ensure that the KIRK Wireless Server 500 is powered up and that the serial cable (null-
1.
modem cable) is connected. Please refer to the "RS232 cable layout" 11.0 section in this
manual for configuration.
Click on the CCFP Administration icon
2.
Windows 95/98/2000/NT/XP: Located in Start | Programs | CCFP Administration.
.
KIRK Wireless Server 500 with CLIP – User Guide - 14096500-HD, Ed.8
www.kirktelecom.com/Installer/suk149.asp
21