Polycom KIRK Wireless Server 500 User Manual page 30

5. Under the Repeater tab, enter the values required :
•
Residential Base (KIRK Wireless Server 500): This is the serial number of the KIRK Wireless
Server 500. It appears on the label on the rear of the KIRK Wireless Server 500, e.g.
000046416642.
•
Base to synchronize on: The KIRK Wireless Server number. The KIRK Wireless Server 500 is
set to 1 by default.
•
Repeater number: The user assigned number for the KIRK Repeater. Each figure must be a
unique number between 2 and 7.
6. Click on Write to Repeater.
7. Click on New.
8. Click on Read from Repeater and check that the values are as required.
9. Click on Exit. You can now install and use the KIRK Repeater.
For further use of the ServiceTool, please refer to the Help file.
KIRK Wireless Server 500 with CLIP – User Guide - 14096500-HD, Ed.8 29