VWR Gel Documentation Imager2 Instruction Manual page 51

Capture function is designed to capture the maximum available number of grey scales without
allowing image saturation. This function is useful for quantifying data.
The following pop-up message is displayed as the Instrument makes an image capture:
AUTO EXPOSING MESSAGE POP-UP
The Exposure Timing icon appears at the bottom of the screen. This changes to display
the progress of the exposure as a coloured bar progressing around the icon.
While the exposure is progressing, and this may take several minutes, it is possible to navigate
away from the Manual Capture screen and browse, view and edit previously captured images.
Once the image is captured, it appears in the left hand pane and also as a thumbnail in the
central Image Pool pane. If more images are captured, these also appear in the Image Pool.
When initially captured, images in the Image Pool are unsaved and are outlined in red.
UNSAVED IMAGE POOL IMAGE
11b.
To save a captured image, select the image in the Image Pool and select the Save icon .
Once saved, images in the Image Pool are outlined in green and their filename appears below
the image.
SAVED IMAGE POOL IMAGE
If further images are captured, additional images appear in the Image Pool, stacked vertically.
Images can be dismissed from the Image Pool by selecting them and then selecting the Close
button . If an image has not been saved you will see a Save prompt.
®
51 vwr.com Instruction manual VWR Imager2