VWR Gel Documentation Imager2 Instruction Manual page 29

2. Scroll the window vertically to view all available options.
Select each hardware option installed in your Instrument.
3.
Note: If you have pre-specified your exact requirements at time of order then this operation may have
been performed by VWR and all the hardware may have been pre-installed. However, it is good
practice to check that the hardware selections made on this screen match the actual hardware
installed.
4. Unselected options are grey/black, selected options turn red.
Once all hardware options have been selected on this first Hardware window, select the Save
5.
icon .
Select the Edit Hardware icon
6.
options into the software.
The Lights & Filters screen is used to specify the fixed lighting unit types installed to each side of the
Darkroom, and also to specify the accessory lighting that is installed on the Darkroom Stage (Lower).
7. For the three lighting locations in the left hand pane; Lower Lighting, Left Light, and Right
Light, select the data button and select the lighting type installed at that location from the drop
down menu.
29 vwr.com
HARDWARE SCREEN
LIGHTS & FILTERS SCREEN
Instruction manual VWR
to open the Lights & Filters screen to programme more
®
Imager2