Advertisement
Quick Links
Advertisement
Related Manuals for VWR Photo Imager
Summary of Contents for VWR Photo Imager
- Page 1 Photo Imager Installation and User Instructions 81-0319-01 Rev A...
- Page 2 Photo Imager Components The Photo Imager is a basic stand-alone gel documentation system, no computer required. The system is designed to fit over a transilluminator. The system combines the equipment below. Refer to the Inventory List/Photo for components. Hood Enclosure Digital 10.0 megapixel color camera...
-
Page 3: Specifications
Photo Imager, No Transilluminator, 115V 89131-414 Photo Imager, No Transilluminator, 230V 89131-416 Photo Imager, 20 x 20cm Transilluminator, 302nm UV, 115V 89131-418 Photo Imager, 20 x 20cm Transilluminator, 302nm UV, 230V 89131-420 Photo Imager, 20 x 20cm Transilluminator, 302nm/365nm UV,115V... -
Page 4: System Setup
Photo Imager System Set-Up The Photo Imager is easy to set up. No tools are required. Hood Enclosure Digital Color Camera Ethidium Bromide Filter Transilluminator Color Printer Combination Lock CAUTION: Do not install the system in places with high moisture, dust or high temperature. Do not use any oil or petroleum based cleaner for the cabinet. - Page 5 Remove the bracket components for access to the camera. Photo Imager’s camera bracket IMPORTANT! Refer to the system operations section for taking gel images with the camera. Camera Buttons 1.
-
Page 6: System Operation
NOTE: Prior to taking a picture, ensure that the Controller Button switch is pressed to O (off). Ensure that the flash is deactivated prior to taking pictures with the Photo Imager. Press the flash indicator on the right of the Selector Button. Use the Selector Button to advance... - Page 7 Photo Imager Press the Mode Button then use the Selector Button to advance to the left or right and select the P option. Press the Function Set Button to set the P option. Use the Zoom Button to zoom in and out to obtain the appropriate image size.
-
Page 8: Service Procedures
Photo Imager Service Procedures Replacement Parts/Accessories Contact VWR at (800) 932-5000 to order replacement parts and accessories for Photo Imager. Replacement paper/ink is available for the printer. For transilluminator replacement parts, refer to the separate manual for the transilluminator included with shipment. - Page 9 Photo Imager Warranty UVP's quality instruments are guaranteed to be free of defects in materials, workmanship, and manufacture for one (1) year from date of purchase. Transilluminators are similarly warranted for two (2) years from the date of purchase. Consumable and disposable products, including, but not limited to lamps or light tubes, filters, or rechargeable batteries are guaranteed to be free from defects in manufacture and materials for ninety (90) days from date of purchase.