VWR Gel Documentation Imager2 Instruction Manual page 66

The appearance of the individual captured images can be manipulated if desired to improve the
appearance of the overall combined image, e.g. by changing the colour of the coloured bands to
produce a greater colour contrast.
(iv) Select the right arrow at the side of the thumbnail image you want to change and select a
new colour from the drop down menu. To reject a colour and return to the original setting
select Default from the drop down menu.
When initially captured, images in the Image Pool are unsaved and are outlined in red.
To save a captured image, select the image in the Image Pool and select the Save icon
57.
Once saved, images in the Image Pool are outlined in green and their filename appears below
the image.
Images can be dismissed from the Image Pool by selecting them and then selecting the
Close button
vwr.com
66
CAPTURED IMAGE COLOUR CHANGE
UNSAVED IMAGE POOL IMAGE
SAVED IMAGE POOL IMAGE
. If an image has not been saved you will see a Save prompt.
Instruction manual VWR
®
Imager2
.