Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Microlife RITE AID BP3KT1-4B
Summary of Contents for Microlife RITE AID BP3KT1-4B
- Page 1 BP3KT1-4B...
- Page 3 BP3KT1-4B ON/OFF button Read the important information in these Display instructions for use before using this device. Follow the instructions for use for M-button (memory) your safety and keep it for future reference. SET Button Type BF applied part MAM Button Cuff socket Keep dry Mains Adapter Socket...
-
Page 4: Table Of Contents
The device can be used in connection with a smart phone via 4. Data memory Bluetooth . The measurement data can be transferred to a smart Viewing the average of the last 28 days phone running the Microlife Connected Health+ mobile software Viewing the stored single values (App) Clearing all values 5. -
Page 5: Using The Device For The First Time
Selecting the correct cuff • The individual results are not displayed. Your blood Only use Microlife cuffs. pressure will only be displayed after all 3 measurements Contact your local Microlife Service if the enclosed cuff 9 does not are taken. fit. -
Page 6: Checklist For Taking A Reliable Measurement
blood pressure and the pulse rate 15 are displayed. Note also 2. Checklist for taking a reliable measurement the explanations on further display symbols in this booklet. Avoid activity, eating or smoking immediately before When the device has finished measuring, remove the cuff. ... -
Page 7: Average Indicator "Mycheck
Information for the doctor in case of repeated appearance of If the black triangle is in the: the IHB symbol: •green zone, your measurement is "Normal." •lower yellow zone, it is "Elevated." This device is an oscillometric blood pressure monitor that also •upper yellow zone, it is "Stage 1 Hypertensive."... -
Page 8: Battery Indicator And Battery Change
6. Using a mains adapter When the batteries are approximately ¾ empty the battery You can operate this device using the Microlife mains adapter (DC symbol 17 will flash as soon as the device is switched on 6V, 600 mA). -
Page 9: Bluetooth® Status
complete pairing. Cancel to abort pairing. in “Tube connection” to ensure the cuff 4. After pairing, the app will show a message to setup the is properly connected. device user selection (1 or 2) to the app user profile. Confirm to proceed with setup. Cancel to abort setup (if user selection is incorrect). - Page 10 ® ® • The device is not intended for measuring blood pressure in self check your local Microlife distributor. pediatric patients of age younger than 12 years old (children, error infant, or neonates). * Please immediately consult your doctor, if this or any •...
- Page 11 • Patient motions during measurement may interfere with pressurization, abort the measurement or loose the cuff to the measurement process and influence results. depressurize the cuff. • Do not use this device in oxygen rich environment or near • Avoid taking measurements of patients with conditions, flammable gas.
- Page 12 This device is covered by a 5 year guarantee from the date of radio or television reception, which can be determined by purchase. During this guarantee period, at our discretion, Microlife turning the equipment off and on, the user is encouraged to try will repair or replace the defective product free of charge.
- Page 13 Directive 93/42/EEC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Microlife Corp. is under license. O Other trademarks and trade names are those of their respective owners.
Need help?
Do you have a question about the RITE AID BP3KT1-4B and is the answer not in the manual?
Questions and answers