Directed DIRECTECHS DS4+ Installation Manual page 20

5
Turn vehicle ignition OFF and proceed to the next step.
Remove the module from the vehicle and reconnect it to your computer. The Directechs
6
web site will automatically recognize that you are moving onto the second phase of the
programming sequence.
7
Select the method and click on Submit Key2Go Request.
Once the configuration is completed, reconnect the module. The LED turns solid green for 3
8
sec. then OFF.
Pair remotes (if applicable). For information on how to pair a specific remote, please
9
refer to its corresponding owner documentation, which can be found inside the product
packaging of the complete system or on www.directechs.com.*
By default, the tachometer is preprogrammed for the vehicle. For instructions on how to
10
program tach, see page 24.
* Your aftermarket remote may differ from the model shown in the illustrations.
You have successfully completed the module programming sequence.
20
Key OUT
START
&
Solid x 3 secs Off
Pair
remotes*
Initialize
tachometer
DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.
Key IN