Removing The Rollotron Comfort Duofern; (E.g. In The Event Of A Move) - RADEMACHER 1623 45 Operating And Assembly Manual

i
21. Removing the RolloTron Comfort DuoFern (e.g. in the event of a move)
1.
+ +
2.
3.
Pull out the belt as far as possible from the top of the
RolloTron Comfort DuoFern.
4.
Remove the cover plate from the lower mounting
holes.
◆ You can remove the front panel by gripping the
small notch in the lower side of the device.
5.
Subsequently, release the fastening screws and pull
the RolloTron Comfort DuoFern completely out of the
belt box.
6.
Remove the belt compartment cover.
There is a risk of injury
from the reel.
◆ Never reach into the reel compartment when the
motor is running. Always remove the mains plug
before touching the reel compartment.
74
+ Erase all settings.
Simultaneously press and
hold the buttons for 5
seconds.
Fully close the roller shutters.
Keep the button held down.
EN