RADEMACHER 1623 45 Operating And Assembly Manual page 9

i
5. General safety information
Incorrect use leads to an
increased risk of injury.
◆ Train all personnel to use the RolloTron Comfort
DuoFern safely.
◆ Avoid allowing persons with limited abilities to operate
the equipment and prevent children from playing with
fixed controllers.
◆ Watch the moving roller shutters and keep other
people away from the area to avoid injury in the event
the shutters suddenly slip.
◆ Undertake all cleaning work on the roller shutters with
the equipment disconnected from the mains power.
The mains socket and plug must be easily accessible
at all times.
According DIN EN 13659, it is necessary to determine that
the movement conditions for the shutters are maintained
in accordance with EN 12045. The displacement must
amount to at least 40 mm on the lower edge in the rolled-
out position with a force of 150 N in the upwards direction.
In doing so, it must be ensured that the extending speed of
the shutters for the final 0.4 m is less than 0.2 m/s.
Exceeding the maximum permissible running time
(KB) can overload and damage the RolloTron Comfort
DuoFern.
◆ The maximum permissible running time for a cycle may
not be exceeded when the equipment is in operation.
For this reason, the RolloTron Comfort DuoFern has an
automatic running time limit (KB) of four minutes.
◆ If the running time limit is triggered, then the RolloTron
Comfort DuoFern must be left for at least 12 minutes to
cool down. Full operational availability is re-established
after approx. one hour.
EN
9