Removing The Rollotron Basic 1100 (E.g. In The Event Of A Move) - RADEMACHER RolloTron Basic 1100 Assembly Manual

i

17. Removing the RolloTron Basic 1100 (e.g. in the event of a move)

1.
Remove the cover plate from the lower assembly
screws and setting buttons.
2.
+ + Erase all settings.
SO
WI
Simultaneously press and hold the
buttons for 4 seconds.
3.
Fully close the roller shutters.
4.
Continue to press and hold the down button.
5.
In this process, pull out the belt as far as possible from
the top of the RolloTron Basic 1100.
6.
Remove the mains plug from the
socket.
7.
Subsequently, release the assembly screws and pull
the RolloTron Basic 1100 completely out of the belt
box.
EN
75