Automated Solar Function; Brief Description - RADEMACHER 1623 45 Operating And Assembly Manual

18.4 Automated solar function; brief description
The automatic solar function enables brightness-depend-
ent control of the roller shutters in combination with the
light sensor. To do this, the light sensor is secured to the
window pane with a sucker and then plugged into the
RolloTron Comfort DuoFern device.
or
A central sun shading controller is used to transmit the
required signals to the RolloTron Comfort DuoFern as well
as to the other devices on the DuoFern network.

Automated solar function

Automatic moving up and down of the roller shutter once a
set limit is exceeded. The roller shutter end position can be
freely selected by changing the position of the light sensor
on the window pane or by setting the sunshine position.
Please note the state of the sun icon on the standard
display.
On
The automatic solar function is switched on.
Flashing
During the activated automated solar function, the
corresponding icon flashes in the standard display as soon
as sunlight is detected.
56
Example installation
Light sensor, see page 85 (accessories)
EN