Brief Description - RADEMACHER 1623 45 Operating And Assembly Manual

i

9. Brief description

The RolloTron Comfort DuoFern is a roller shutter drive
designed for use inside. The unit is installed as a flush-
mounted device. The power supply is provided via the
enclosed connecting cable with plug or a fixed installed
lead.
The RolloTron Comfort DuoFern can be controlled individu-
ally on site or it can be integrated into a DuoFern network.
As soon as you integrate your RolloTron Comfort DuoFern
into a DuoFern network, you can make use of many func-
tions offered by the corresponding DuoFern controllers.
The DuoFern receivers (actuators) and transmitters
must be connected to the DuoFern network.
NOTE
You can find a detailed description of the various func-
tions, configuration options and possible combinations
for the DuoFern system at:
http://www.rademacher.de/duofern.
12
Central control of several DuoFern devices with a single
RolloTron Comfort DuoFern.
A DuoFern network generally includes the DuoFern
central operating unit or the HomePilot® (together with
the associated user interface) as the central controllers.
Alternatively you can also use the RolloTron Comfort
DuoFern as a central controller. To do so, you must con-
figure the corresponding DuoFern mode (s. Seite 37).
Selecting a DuoFern mode
The RolloTron Comfort DuoFern comes with three
DuoFern modes which enable you to specify how the
RolloTron behaves within the DuoFern network or local
installation on-site.
The following DuoFern modes are available for
selection (see page 37).
[ 1 ] = DuoFern receiver
[ 2 ] = DuoFern transmitter
[ 3 ] = Local operation
EN