Menu 4 - Configuring The Automatic Solar Function - RADEMACHER 1623 45 Operating And Assembly Manual
Electronic roller shutter belt winder rollotron comfort duofern
Source: rademacher.de
Hide thumbs
Also See for 1623 45:
Table of Contents
Advertisement
18.4.1 Menu 4 - Configuring the automatic solar function [
1.
Call up the main menu.
2.
Select and open
Menu 4 [
] Automatic
solar function.
3.
Activate and confirm the
automatic solar function.
On = automated solar
function on
OFF = automated solar
function off
Depending on
solar mode
(see page 39)...
[ 1 ] Local light
sensor
[ 2 ] Local light sensor and
sunshine position
[3] Central sun shading
controller
58
...the following settings
are required:
Continue at
point 4
Continue at
points 4 and 5.
Continue at
point 5
] and sunshine position.
4.
Customisation of the local
solar set limit.
ACTUAL [ IST ] value
Currently measured
brightness (e.g. 12).
"
- -
"= too dark
SET [ SOLL ] value
Configurable set limit
31 = minimal sun,
approx. 2000 Lux
45 = bright sunlight
approx. 20000 Lux
a)
Return to main menu or
continue at point 5.
EN
Advertisement
Chapters
Table of Contents
