These instructions... With your purchase of RolloTron Comfort DuoFern, you have chosen a quality product manufactured by RADEMACHER. Thank you for the trust you have placed ...describe how to install the equipment, connect the elec- in us. trical system and operate your roller shutter belt winder.
Table of Contents Dear Customer, ................2 16.1 Moving to a target position ......31 1. Scope of delivery (item no. 1623 45 x1) * .......5 16.2 Displaying weather data ........32 2. General view (item no. 1623 45 x1) * .......6 17.
Page 4
Table of Contents 18.5.1 Menu 5 - Customising the 18.7.13 Menu 7.7.6 - Display software automatic dawn time [ ] ....61 version ............72 18.6 Random function; brief description ....62 18.7.14 Menu 7.8 - DuoFern settings / overview........... 72 18.6.1 Menu 6 - Configuring the random function [ ] ......
3. Display overall view Display symbol legend (MON...SUN) Week days AUTO - automatic mode [ MO ... SO ] [ AUTO ] Time / setting parameters Automatic mode off Rain display Timer periods Key lock Automatic dusk function [ IST ] ACTUAL value Automated solar function Direction of travel - up / down...
4. Key to symbols Risk of fatal NOTE / IMPORTANT electric shock. In this way, we wish to make you aware of the following content in order to ensure optimal functionality. ◆ This sign warns of danger when working on electrical connections, components, etc.
Page 9
5. General safety information Incorrect use leads to an According DIN EN 13659, it is necessary to determine that increased risk of injury. the movement conditions for the shutters are maintained in accordance with EN 12045. The displacement must ◆ Train all personnel to use the RolloTron Comfort amount to at least 40 mm on the lower edge in the rolled- DuoFern safely.
Only use original spare parts safety equipment. from RADEMACHER. IMPORTANT ◆ By doing so, you avoid the risk of malfunctions and damage to your RolloTron Comfort DuoFern.
The following DuoFern modes are available for tions, configuration options and possible combinations selection (see page 37). for the DuoFern system at: [ 1 ] = DuoFern receiver http://www.rademacher.de/duofern. [ 2 ] = DuoFern transmitter [ 3 ] = Local operation...
Page 13
9. Brief description Soft-start / Soft-stop Overload cut-off The RolloTron Comfort DuoFern is equipped with a Soft- The RolloTron Comfort DuoFern is equipped with an overload cut-off system. start / Soft-stop function. Gentle starting and stopping serves to protect the belt winder mechanics and the belt. If the drive jams in the UP ( ▲ ) cycle (for example, due to ice), the belt winder will also switch off.
Page 14
13. Ventilation position on / off on / off ● ● ● 14. Ventilating position 1 - 99 % 80 % ● ● ● 15. Connectivity test ● ● The „WR ConfigTool“ software can be downloaded from our website at www.rademacher.de...
9.2 Overview of local functions ◆ Display background illumination ◆ Key lock ◆ Operational demonstrator ◆ System settings ◆ Manual operation ◆ Permanent storage of the settings ◆ Direct configuration and movement to a target ◆ Automatic summer / winter changeover position ◆...
10. General assembly instructions Poor routing of the belt can cause the belt to fail and NOTE leads to unnecessary loads on the RolloTron Comfort In order to ensure optimal operation, the RolloTron Comfort DuoFern. DuoFern should not be installed near metal objects. ◆...
RolloTron Comfort DuoFern. All dimensions in mm All dimensions in mm RolloTron Comfort DuoFern RolloTron Comfort DuoFern Plus Item no.: Item no.: 1615 45 11 (small belt) 1623 60 11 (standard belt) 1623 45 x1 (standard belt)
Page 18
10.2 Preparation for installation Remove the old belt winder, if you are carrying out a conversion to an existing roller shutter system. ◆ Let the roller shutter move fully down, until the slats are completely closed. ◆ Remove the old belt winder and unreel the belt. There is a risk of injury from the pre-tensioned springs on the old belt winder.
11. Safety instructions for electrical connection Danger due to electric shock when working on all NOTE electrical systems. The electrical connection for the RolloTron Comfort DuoFern can be made either with the supplied con- ◆ The electrical connection and all work on electrical necting cable or via a fixed laid cable.
11.1 Electrical connection Connect the supplied connecting cable. The colour coding is irrelevant for the installation. Damaged cables can Traction cause short circuits. relief ◆ Pay attention that cables are laid safely. ◆ The connecting cable may not be pinched when screw- ing on the belt winder as this could lead to damage.
12. Drawing in and fastening the belt Insert the mains plug into the socket. Press the [ Up ] key until the fastening hooks are easily accessible in the reel compartment. There is a risk of injury from the reel. ◆...
13. Mounting the RolloTron Comfort DuoFern Mount the RolloTron Comfort DuoFern as straight as pos- sible, so that the belt can wind correctly. Ensure that the RolloTron Comfort DuoFern sits freely in the belt box and that it is not in contact with the masonry, otherwise noise will be generated during operation.
14. Brief description of the key functions Operating keys [Up / Down] Setting keys, [ / ] ◆ Manual operation [ Up / Down t ]. ◆ Setting of parameters (more / less). ▲ ◆ Pressing one of the keys for an extended period SET/Stop key, [ ] causes the numbers to change more quickly in the ◆...
14.1 Brief description of the standard display and main menu The standard display (example) The main menu Menu number Functions / menus ◆ Displays the current day of the week and time. ◆ Enables display and selection of the individual functions and menus.
14.2 Introduction to opening and closing the menus Call up the main menu. Toggle back to the standard display. Pressing the [ M ]-key in the 1 sec. In order to do so, press and standard display causes the hold the [ M ] button for main menu to open.
15. Initial commissioning with the help of the installation wizard Additional information about configuring the end An installation wizard is available in order to help you points configure the RolloTron Comfort DuoFern quickly and easily. The wizard automatically guides you through the The end points must be configured in order for the roller configuration process for initial commissioning or after shutters to stop at the desired upper and lower positions.
Page 27
15. Initial commissioning with the help of the installation wizard Set the upper end point. Set and confirm the time. NOTE In order to do so, press and hold the [ Up ] key. Pressing the setting key for an extended period causes The roller shutters travel the numbers to progress more quickly.
Page 28
15. Initial commissioning with the help of the installation wizard Set and confirm the If [ ASTRO ] is selected, opening time [ ]. then the calculated opening time for the This closing time mode current day is displayed. applies to the entire week (MON...SUN) [ MO...SO ].
Page 29
15. Initial commissioning with the help of the installation wizard NORMAL The standard display is The roller shutters close shown as soon as the final at the configured closing setting is confirmed. time. The RolloTron Comfort DuoFern is now ready for ASTRO operation.
16. Manual operation Manual operation is possible in any of the modes and has priority over the programmed automatic functions. Open the roller shutters. Briefly pressing the button causes the roller shutters to move to the upper end point. Causes the roller shutters to stop in the interim.
16.1 Moving to a target position If necessary, you can enter an arbitrary target position for Display the current position of the roller shutters. your roller shutters which you can then move to directly. The RolloTron Comfort DuoFern is able to move to the target In order to do so, briefly position and stop the roller shutters fully independently press one of the two...
16.2 Displaying weather data If a DuoFern environmental sensor is being used on site, Accessing the weather data. it is possible to view the environmental sensor's weather To do so, briefly press the data on-screen. [ SET / Stop ] key. Initially, the temperature NOTE is displayed.
S etting the ◆ Additional information about logging on can be solar mode .......39 obtained from the login matrix on our website under: 7.8.4 www.rademacher.de S witching weather data on/off ......41 7.8.5 D isplay DuoFern The following section serves to describe all required address ......42...
17.1 Menu 7.8.1 - Logging DuoFern devices on/off 3.1. Select and open menu 7.8.1 [ On ] Registration mode Log-on/off. The display flashes [ On ]. Login mode remains active for approx. 120 Approx. 120 seconds. seconds The number of logged on DuoFern devices is indicated on the display.
Page 35
17.1 Menu 7.8.1 - Logging DuoFern devices on/off 3.2. [ OFF ] Logout mode Deleting all logged-on DuoFern devices. The display flashes Select and open menu [ OFF ]. 7.8.1 [ Log-on/off ]. Logout mode remains Approx. 120 active for approx. seconds 120 seconds.
Page 36
17.1 Menu 7.8.1 - Logging DuoFern devices on/off Clearing the DuoFern network. Select and open menu 7.8.1 Log-on/off. This function enables you to log off all DuoFern devices from the RolloTron Comfort DuoFern that are no longer accessible via radio. NOTE All battery-operated DuoFern transmitters (e.g.
17.2 Menu 7.8.2 - Set DuoFern mode The RolloTron Comfort DuoFern comes with three DuoFern [ 1 ] DuoFern receiver modes which enable you to specify how the RolloTron behaves within the DuoFern network or local installation on-site. HomePilot® The following DuoFern modes are available for selection: [ 1 ] = DuoFern receiver [ 2 ] = DuoFern transmitter...
Page 38
17.2 Menu 7.8.2 - Set DuoFern mode [ 2 ] DuoFern transmitter [ 3 ] Local operation (factory setting) DuoFern manual transmitter RolloTron Comfort DuoFern ◆ The RolloTron Comfort DuoFern is operated as a local ◆ The RolloTron Comfort DuoFern is integrated into a DuoFern network as a central controller [Sender] and roller shutter belt winder using its automatic functions is intended to provide automatic functions for other...
17.2 Menu 7.8.2 - Set DuoFern mode Select and open menu NOTE 7.8.2 DuoFern mode. Regardless of the set mode, all manual and automatic control signals received via radio will be executed locally. With one exception: Control commands for the automated solar functions will Select and confirm the only be accepted if the solar mode [ 3 ] is activated (see mode.
Page 40
17.3 Menu 7.8.3 - Setting the solar mode [ 1 ] Local light sensor * ◆ The solar limit value must be set. ◆ The desired sunshine position must be set on the Select mode [ 1 ] if ... RolloTron Comfort DuoFern and the other DuoFern ◆...
17.3 Menu 7.8.3 - Setting the solar mode Select and open menu Select and confirm the solar 7.8.3 solar mode. mode. 1 = Local light sensor 2 = Local light sensor and sunshine position 3 = Central sun shading controller 17.4 Menu 7.8.4 - Switch weather data on/off This menu enables you to switch the weather data display Select and open menu...
17.4 Menu 7.8.4 - Switch weather data on/off The DuoFern address of the NOTE environmental sensor is The environmental sensors displayed. can be deleted if necessary. Briefly press the [ SET / Stop ] key. Select and confirm the This display is shown by desired environmental way of acknowledgement.
18. Menu overview / main menu Main menu Icon Menu Page Automatic mode ......44 Switching times ......46 Automatic dusk control ....53 Automatic solar function ..56 Automatic dawn control ....60 Random function ......62 System settings ......63...
18.1 [ AUTO ] Automatic mode; brief description Automatic mode on Automatic mode off Icon in standard display Icon in standard display ◆ All automatic functions are deactivated; only manual Automatic mode is active, all automatic functions are operation is possible. switched on, e.g.: ◆...
18.1.1 Menu 1- Automatic mode on / off Toggling directly to the Call up the main menu. standard display You can also directly toggle Select and open menu 1 automatic mode on and off [ AUTO ]. in the standard display. Select and confirm the de- sired setting.
18.2 Switching times (opening and closing times) [ / ]; brief description [ 1 ] Weekly switching times You can configure various opening [ ] and closing times [ ] in order to open or close your roller shutters at your You can set two different switching times here: preferred times.
Page 47
18.2 Switching times (opening and closing times) [ / ]; brief description Double the amount of switching times by activating a Application example for a second switching time. second switching time block: You can use a second switching time, for example, to darken If necessary you can double the amount of available a child's bedroom at midday: opening and closing times.
Page 48
18.2 Switching times (opening and closing times) [ / ]; brief description Selecting a switching time mode. Link to the opening time [ ] ■ The roller shutters open at the daily calculated A switching time mode can be selected during the settings dawn time.
18.2 Switching times (opening and closing times) [ / ]; brief description ◆ SENSOR (only for closing times [ ] ) Example a: ■ – In winter dusk begins, for example, at approx. The closing time is controlled by a light sensor in 17:00 hours.
Page 50
18.2.1 Menu 2 - Configuration of opening and closing times [ / ] Weekly switching times Set and confirm an NOTE opening time [ ]. The mode of operation and the number of open- ing and closing times that can be configured depends on the desired switching Configure the switching ◆...
Page 51
18.2.1 Menu 2 - Configuration of opening and closing times [ / ] Set and confirm the closing If [ ASTRO ] is selected, time [ ]. then the calculated The closing time applies to closing time for the all days of the week (Mon... current day is displayed.
Page 52
18.2.1 Menu 2 - Configuration of opening and closing times [ / ] Set and confirm the INFORMATION ABOUT THE [ ASTRO ] SWITCHING second opening time [ ]. TIME MODE ◆ If [ ASTRO ] is selected as the switching time mode, OFF = The opening time is the calculated darkness time can be individually deactivated.
18.3 Automatic dusk function; brief description Automatic dusk function with connected The automatic dusk function causes the roller shutters to close automatically to the lower end point or configured light sensor ventilation position. At twilight, the roller shut- You can choose between two automatic dusk ters will lower to the lower functions: end limit or configured...
18.3.1 Menu 3 - Customising the automatic dusk function [ ] 3.2. [ ASTRO ] Call up the main menu. Setting an offset. The offset function can Select and open be used to modify the Menu 3 [ calculated Astro time by Automatic dusk function.
Page 55
18.3.1 Menu 3 - Customising the automatic dusk function [ ] 3.3. [ SENSOR ] Customisation of the twilight limit value in switch time mode [ SENSOR ]. If the set limit value is not met due to the onset of twilight, the roller shutters will close.
18.4 Automated solar function; brief description The automatic solar function enables brightness-depend- ent control of the roller shutters in combination with the light sensor. To do this, the light sensor is secured to the window pane with a sucker and then plugged into the RolloTron Comfort DuoFern device.
Page 57
18.4 Automatic solar function; brief description Automatic lowering Examples of a locally mounted sun If the sensor detects uninterrupted sunlight for 10 minutes, 10 mins. sensor. the roller shutter lowers in ◆ solar mode [1] until its shadow covers the light sensor. ◆...
18.4.1 Menu 4 - Configuring the automatic solar function [ ] and sunshine position. Customisation of the local Call up the main menu. solar set limit. Select and open Menu 4 [ ] Automatic solar function. ACTUAL [ IST ] value Currently measured brightness (e.g.
Page 59
18.4.1 Menu 4 - Configuring the automatic solar function [ ] and sunshine position The local sunshine position Set the local sunshine position. You can set an arbitrary sunshine position for your RolloTron Comfort DuoFern which your roller shutters will Move the roller shutters lower to when the automated solar function is activated.
18.5 Automatic dawn function; brief description Configure a custom offset period When configuring opening times [ ] it is possible to link them to a switch time mode, see page 49. The calculated dawn time can be customised to personal preferences by means of an offset between -60 and +60 The calculated dawn time can be customised by linking minutes.
18.5.1 Menu 5 - Customising the automatic dawn time [ ] 3.2. [ ASTRO ] Call up the main menu. Setting an offset. The offset function can Select and open be used to modify the Menu 5 [ ] Automatic calculated Astro time by dawn function.
18.6 Random function; brief description The random function enables a random delay of the set NOTE timer periods ranging between 0 and 30 minutes. The corresponding icon flashes in the standard display The random function is executed for: when the random function is activated, during the period ◆...
18.7 Menu 7 - System settings [ ]; brief description This menu enables you to configure additional device Menu 7 - System settings and system settings in order to customise your RolloTron Icon Menu Page Comfort DuoFern to your individual preferences and local conditions.
18.7.1 Menu 7.1 - Set time and date [ Select and open Menu 7.1 Date [ Day.Month ] ] Time and date. Setting order Time Year 18.7.2 Menu 7.2 - End point configuration [ First move the blinds Setting order manually to the centre Set the upper end point, position.
18.7.3 Menu 7.3 - Configure ventilation position [ If you want your roller shut- Move the roller shutters ters to close at a different to the desired position. position to the lower end point, you can use this function to determine an arbitrary position (e.g.
18.7.4 Menu 7.4 - Set postcode [ PLZ ] Select and open NOTE: Menu 7.4 [ PLZ ] Postcode. ◆ Only the first two digits of the code are entered for German cities. ◆ Please refer to the time zone table on page 83 for various European cities.
18.7.5 Menu 7.5 - Weekly programme [ ] configuration The subsequent mode of operation and the number of Select and open opening and closing times that can be configured depends Menu 7.5 [ ] Weekly on the desired switching programme. programme.
18.7.6 Menu 7.6 - Configure motor speed The maximum running Set and confirm the speed of the motor can desired speed. be configured if necessary = low (e.g. to reduce noise). = medium = high Select and open Menu 7.6 Motor speed. 18.7.7 Menu 7.7 - Device settings, brief description Sub-menus: This menu enables...
18.7.8 Automatic summer/winter changeover on/off The RolloTron Comfort DuoFern features an automatic Select and open Menu summer/winter changeover function. 7.7.1 Automatic summer/ winter changeover. Recommendation for operating the RolloTron Comfort DuoFern outside Germany. If the controller is not being used in Germany, it may be necessary to switch off the automatic summer / winter Set automatic summer/ clock change function.
18.7.10 Menu 7.7.3 - Configure continuous display backlighting Pressing one of the Subsequently the Configure and confirm operating keys causes brightness gradually the desired brightness. the backlighting in the fades down to the = Display standard display to switch configured value. backlighting for on at full intensity.
18.7.12 Menu 7.7.5 - Switch key lock on/off You can activate the key lock in order to protect the Activate / deactivate the RolloTron Comfort DuoFern against unintentional input. key lock directly from the standard display. Automatic activation after approx. two minutes. If the key lock is activated and no keys are pressed within Press and hold the [ SET/ a period of two minutes, the key lock is activated auto-...
18.7.13 Menu 7.7.6 - Display software version Select and open menu Subsequently the 7.7.6 Software version. version number will be displayed. 18.7.14 Menu 7.8 - DuoFern settings / overview We introduce and describe all of the DuoFern settings for Menu 7 - System settings configuration of the RolloTron Comfort DuoFern starting Icon Menu...
19. Erase all settings, software reset If necessary, you can Next, the device's software erase all of your settings version will be displayed and return the RolloTron for a few seconds. Comfort DuoFern system to All settings will be erased its original factory settings.
21. Removing the RolloTron Comfort DuoFern (e.g. in the event of a move) Erase all settings. Simultaneously press and hold the buttons for 5 seconds. Fully close the roller shutters. Keep the button held down. Pull out the belt as far as possible from the top of the RolloTron Comfort DuoFern.
Page 75
21. Removing the RolloTron Comfort DuoFern (e.g. in the event of a move) Check the position of the fastening hook and move the hook into an easily accessible position if necessary. Subsequently remove the mains plug permanently from the socket. Release the belt from the fastening hook and pull it out completely from the front of the RolloTron Comfort DuoFern.
22. Removing the belt in the event of unit failure In the event that the RolloTron Comfort DuoFern unit fails RolloTron Comfort and the motor no longer runs, you can use the disengaging Drive release DuoFern bracket provided in order to fully remove the belt from the belt winder unit, without the need for cutting it.
23. What to do if... ? Fault Possible cause / solution ... the RolloTron Comfort DuoFern indicates no functions? Check the power supply incl. connecting cable and plug..the RolloTron Comfort DuoFern no longer reacts in the The electronic system switched off the drive after closing the roller morning at the configured switching time? shutters because the deflection roller stopped turning.
Page 78
23. What to do if... ? Fault Possible cause / solution ...the roller shutters stop during downward travel? a) The roller shutters may have hit an obstacle. Move the roller shutters back up and remove the obstacle. b) Slats have shifted out of alignment. If possible, move the roller shutters back up and realign the slats.
23. What to do if... ? Fault Possible cause / solution ... the RolloTron Comfort DuoFern no longer reacts to The maximum running time of the drive has been exceeded, manual commands and a temperature icon is shown see page 9. on the display? The motor is too hot.
25. Technical Specifications Power reserve Supply voltage: 230 V / 50 Hz; 230 V / 60 Hz Nominal power: 70 W The RolloTron Comfort DuoFern has a power reserve of approx. 8 hours. Standby power: < 0.6 W Nominal torque: Data retention subsequently to - RolloTron Comfort DuoFern 10 Nm...
26. Tractive force diagrams Belt length [ m ] Lifting weight [Kg] Belt thickness 1.0 mm Belt thickness 1.3 mm Belt thickness 1.5 mm Belt length [m] Belt lengths for RolloTron Comfort DuoFern Belt lengths for RolloTron Comfort DuoFern Plus...
29. CE Mark and EC Declaration of Conformity The electronic roller shutter belt winder RolloTron Comfort DuoFern (item no.: 1623 45 x1 / 1623 60 11 /1615 45 11) complies with the requirements of the following directives and standards: 1999/5/EC R&TTE directive...
RolloTron Comfort DuoFern to local Item no. Cable length conditions. 7000 00 88 0.75 m Further information about our accessories is available at 7000 00 89 1.5 m the following website: 7000 00 90 www.rademacher.de/zubehoer 7000 00 91 7000 00 92 10 m...
31. Warranty conditions RADEMACHER Geräte-Elektronik GmbH provides RADEMACHER shall remedy any defects, which occur a 36-month warranty for new systems that have within the warranty period free of charge either by repair been installed in compliance with the installation or by replacement of the affected parts or by supply of a instructions.
Page 88
RADEMACHER Geräte-Elektronik GmbH & Co. KG Buschkamp 7 46414 Rhede (Germany) info@rademacher.de www.rademacher.de Service: Hotline 01807 933-171* Fax +49 2872 933-253 service@rademacher.de * 30 seconds free of charge, subsequently 14 cents / minute from German fixed line networks and max. 42 cents / minute from German cellular networks.