Menu 7.7.3 - Configure Continuous Display Backlighting; Menu 7.7.4 - Set Clock Mode - RADEMACHER 1623 45 Operating And Assembly Manual

18.7.10 Menu 7.7.3 - Configure continuous display backlighting

Pressing one of the
operating keys causes
the backlighting in the
standard display to switch
on at full intensity.
1.
Select and open
Menu 7.7.3 Display
backlighting.

18.7.11 Menu 7.7.4 - Set clock mode

This menu enables you
to configure the time
base for the internal clock
(depending on the local
power supply).
1.
Select and open
Menu 7.7.4 Clock mode.
70
Subsequently the
brightness gradually
fades down to the
configured value.
a) Configure and confirm
the desired brightness.
0 = Display
backlighting for
the continuous
display is
switched off.
1-3 = Brightness levels
3
= Maximum
brightness
a) Set and confirm the
desired clock mode.
1 = 50 Hz mode
2
= 60 Hz mode
3 = Quartz mode
EN
> The display backlight
remains permanently
switched on at the
configured setting.
> e.g. in Europe
> e.g. in the USA
> for other mains
frequencies