Mounting The Rollotron Comfort Duofern - RADEMACHER 1623 45 Operating And Assembly Manual

i

13. Mounting the RolloTron Comfort DuoFern

Mount the RolloTron Comfort DuoFern as straight as pos-
sible, so that the belt can wind correctly.
Ensure that the RolloTron Comfort DuoFern sits freely in
the belt box and that it is not in contact with the masonry,
otherwise noise will be generated during operation.
1.
Slide the RolloTron Comfort DuoFern into the belt box
and screw it tight using the screws provided.
IMPORTANT
Ensure that the connecting cable is laid correctly inside
the cable duct, otherwise it can be crushed and damaged
when the cover is screwed in place.
2.
Slide the enclosed cover plate over
the lower mounting holes.
3.
Commissioning
◆ Re-insert the mains plug into the 230 V / 50 Hz socket.
This completes the installation process.
IMPORTANT
The mains socket and plug must be easily accessible at
all times.
22
EN