17.3 Menu 7.8.3 - Setting the solar mode
1.
Select and open menu
7.8.3 solar mode.
17.4 Menu 7.8.4 - Switch weather data on/off
This menu enables you to switch the weather data display
on and off.
If numerous environmental sensors are being received,
then you can additionally select the desired environmental
sensor.
NOTE
Environmental sensors update the weather data approx.
every 5 minutes. For this reason, it can take a few minutes
until the weather data is displayed.
2.
Select and confirm the solar
mode.
1 = Local light sensor
2 = Local light sensor and
sunshine position
3 = Central sun shading
controller
1.
Select and open menu
7.8.4 weather data.
2.
Switch weather data
display ...
On = ... on *
OFF = ... off
* Continue at 3.
EN
41