Information About Maintenance And Care Of Your Equipment - RADEMACHER 1623 45 Operating And Assembly Manual

i
23. What to do if... ?
Fault
... the RolloTron Comfort DuoFern no longer reacts to
manual commands and a temperature icon is shown
on the display?
... the RolloTron Comfort DuoFern no longer reacts to
automatic commands and an error message [ Er02 ] is
shown on the display?
i

24. Information about maintenance and care of your equipment

Maintenance
Please check your RolloTron Comfort DuoFern and all of
your roller shutter components regularly for damage:
◆ The deflection roller on the roller shutter box must
move freely.
◆ The belt may not be frayed.
◆ Have damaged components exchanged by a
specialist firm.
Possible cause / solution
The maximum running time of the drive has been exceeded,
see page 9.
The motor is too hot. The RolloTron Comfort DuoFern will be
operational again in approx. 1 hour.
a) The RolloTron Comfort DuoFern is no longer ready for operation.
Carry out a hardware reset in accordance with page 73.
b) If the error persists after carrying out a hardware reset, dismantle the
RolloTron Comfort DuoFern and have the device repaired by a
specialist dealer.
Maintenance
You can clean the RolloTron Comfort DuoFern using a
damp cloth. Please do not use aggressive or abrasive
cleaning agents.
EN
79