11. Important information prior to electrical installation and mounting
i
Installation and electrical connection of the Troll Standard
may only be undertaken with the supplied installation
housing [ 3 ].
The connecting terminals [ 4 ] are located at the bottom of the
installation housing [ 3 ].
[ 3 ]
[ 4 ]
14
NOTE
Installation housings for other variants of the Troll controller are
not compatible.
You must configure the end stops for the tubular motor
before using for the first time and making the final
electrical connection.
◆ If no end stops are configured, then it is vital that both end
points are configured for the tubular motor, as failure to do
so can lead to malfunctions.
◆ In order to do so, follow the information provided in the
operating manual for the respective tubular motor.
EN