Advertisement
Dimensions and Mounting
Mounting the Standard Panel
Dimensions are in inches (mm)
Knockouts are 7/8 inch (22 mm) in diameter
Left Side View
(24) conduit
knockouts for wall
control and sensor
and LZC link wiring
PELV
(Class 2: USA)
wiring only
Knockouts for
DMWP18 use
only
Knockouts for
DMWP24 use
only
2.5 (635)
6.0 (152)
63.0
(1600)
52.4
(1330)
Bottom View
R
(continued)
Top View
Front View
0.31 (8)
diameter
0.63 (16)
diameter
(4) keyholes for surface
mounting
18.5
(470)
22.0
(560)
2.5 (63.5)
Punch hole for main feed entry
(panel with main lugs only)
Installation Guide for Lighting Zone Controllers
This page applies to:
Std.
Panel
Right Side View
(24) conduit
knockouts for input
feeds (feed-through
panel only), switch
legs, and dimmed
legs to loads
2.5 (63.5)
7
Advertisement
