Advertisement
Appendix: Emergency Mode
Wiring Method Two (continued)
Switch S3: Each lighting zone controller on Link 3 will enter emergency mode. Lighting
zone controllers on other Digital microWATT
panels, or on Links 1 or 2 of the same panel, will not be affected.
Router Panel or
GRAFIK 7000P Processor Panel
LZC LINK 1
LZC LINK 2
To lighting zone controllers
on LZC links 1 and 2
Switch S4: Only lighting zone controller A will enter emergency mode. Neither lighting zone controller B nor any
other lighting zone controller will enter emergency mode from switch S4.
Lighting Zone Controller A
GND
MUX
MUX
Link common
Emergency
Shield
To panel
or previous lighting zone controller
34
Installation Guide for Lighting Zone Controllers
(continued)
router panels or GRAFIK
TM
LZC LINK 3
Link common
Switch S3 (normally
Emergency
MUX
MUX
Shield
Switch S4
(normally closed)
7000P processor
TM`
First Lighting Zone Controller on Link 3
GND
closed)
Lighting Zone Controller B
GND
This page applies to:
Small
Std.
Panel
Panel
LZC1
To next lighting zone controller
on LZC link 3
To next lighting zone controller
R
Advertisement
