ACME THUNDERBOLT User Manual page 14

Hide thumbs Also See for THUNDERBOLT:

Table of Contents

Error Logs

To select Error Logs, press the ENTER button to confirm. Use the UP/DOWN button to select Fixture

Errors or Reset Error Log, press the ENTER button to store. To select Reset Error Log, press the

ENTER button to confirm, use the UP/DOWN button to select No or Yes, press the ENTER button to

store. To select Yes, press the ENTER button to confirm, use the UP/DOWN button to set the

password 050, Press the MENU button to return to the previous menu or wait one minute to

automatically exit the menu mode.

Software Version

Select

software of the unit. Press the MENU button back to the last menu or idling 30 seconds to exit menu

mode.

Factory Reset

Select

NO/Yes. Select Yes, fixture will resume factory settings. Press the MENU button back to the last menu or

idling 30 seconds to exit menu mode.

RDM FUNCTIONS

Select the MANUFACTURER menu to display the MANUFACTURER of the device.

Select the SOFTWARE VERSION menu to display the program VERSION number of the luminaire.

Select the START ADDRESS menu to set the DMX ADDRESS of your lamp (001-512) .

Select the DEVICE MODEL DESCRIPTION menu to display the DEVICE MODEL number.

Select the DEVICE LABEL menu to change the model of the lamp.

Select the DMX PERSONALITY menu to set the channel mode for the lamps.

Select the DMX PERSONALITY DESCRIPTION menu to display the currently selected channel mode of

the luminaire.

Select the DEVICE HOURS menu to display the running time of the lamp.

Select the RESET DEVICE menu, and the WARM RESET/COLD RESET option appears. When WARM

RESET is selected, the lamp will be hot RESET, and when COLD RESET is selected, it will exit.

, press the ENTER button to confirm. The display will show the version of

, press the ENTER button to confirm. Use the UP and DOWN button to adjust the

13D

Table of Contents