Advantech ROM-5420 User Manual page 4

Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
 To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
 Take care to avoid electrostatic discharge (ESD) before making any configura-
tion changes. Use a static-free workstation, grounding strap, or take other pre-
cautions. The ESD that may occur as you connect a jumper or install a card can
damage sensitive electronic components.
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
 1 ROM-5420
 4 Screws for ROM-5420
 1 China RoHs Notice
Optional Accessories
Part No.
1960063090N001
1960063089N001
1930005215
1930004835
9696ED2000E
1700022373-01
Development Board
Part No.
ROM-DB5900-SWA1E
For more information please refer to "Advantech Baseboard Check List" and "Evalu-
ation Board Reference Schematic".
You can download "Advantech Baseboard Check List" and "Evaluation Board Refer-
ence Schematic" from http://com.advantech.com/
ROM-5420 User Manual
Description
Heat spreader for ROM-5420
Semi-heat sink for ROM-5420
Screw for heat spreader
Screw for Semi-heat sink
Debug adapter board
Debug port cable for ROM-5420
Description
Development carrier board for SMARC Rev.1.0
iv