Section 3 Advanced Operation; Sending A Message - Icom IP110H Operating Manual

3
ADVANCED OPERATION

Sending a message

This function may be usable, depending on the Controller setting.
1. Selecting a call-to party
1� Push [ CLR]�
L You can also open the Phone Book in the MENU screen� (p� 4-3)
2� Push [▲]/[▼] to select a call type, and then push [ENT
(Example: Group)
L See page 3-6 about Talkgroup�
3� Push [▲]/[▼] to select a tab, and then push [ENT
4� Push [▲]/[▼] to select a call-to party, and then push [ENT
(Example: Sales group1)
[ CLR]
L You can also select the call-to party from the Call history entries� (p� 2-5)
2. Selecting a message
1� Push [MENU]�
2� Push [▲]/[▼] to select "FUNCTIONS," and then push [ENT
3� Push [▲]/[▼] to select "Message," and then push [ENT
4� Push [▲]/[▼] to select a message.
• The selected message may scroll, depending on the message length.
5� Push [PTT] or [ENT
• The selected message is transmitted�
[PTT]
[ENT ]
[▲]/[▼]
]�
[MENU]
[ENT ]
[▲]/[▼]
]�
]� (Example: S)
]�
]�
]�
3-2