Dpairing The Ip110H With The - Icom IP110H Operating Manual

5
OPTIONS
Using a Bluetooth headset
DPairing the IP110H with the VS-3
1. Turning ON the transceiver's Bluetooth function
1� Push [MENU]�
2� Push [▲]/[▼] to select "Settings," and then push [ENT
3� Push [▲]/[▼] to select "Bluetooth," and then push [ENT
4� Push [▲]/[▼] to select "Functions," and then push [ENT
5� Push [▲]/[▼] to select "ON," and then push [ENT
[ ]
2. Entering the VS-3 Pairing mode
1� Confirm the VS-3 is turned OFF�
2� Hold down [PWR] for 6 seconds�
• The indicator quickly blinks red then blue, and then the headset enters the Pairing mode�
NOTE:
• Charge the VS-3 before operating�
• The VS-3 automatically starts up in the Pairing mode after turning ON, if no
Bluetooth device is entered in its Pairing list�
[MENU]
[ENT ]
[▲]/[▼]
]�
]�
]�
]�
5-6