About The Programmable Keys - Icom IP110H Operating Manual

3
ADVANCED OPERATION

About the Programmable keys

One of the following functions may be assigned to the [
setting� Hold down the key for 1 second to use the assigned function�
Assignable functions:
Function
Message
One Touch
Clear Down
Mute
Emergency
Playback Recording
Temporary Audio Level
z To confirm the assigned function, push [ENT
Example: "Message" is assigned to [
"Mute" is assigned to [MENU].
Icon
Selects an often-used message�
Selects the often-used call type or call-to party�
L The displayed icon differs, depending on the call type.
Hangs up a Phone call�
L You can cancel the call by holding down the key for 1 second, before the target
telephone is picked up, or during a Phone call.
L The transceiver can terminate a Phone call only when:
• The transceiver is individually called from a telephone�
• The transceiver calls a telephone�
Mutes or unmutes the received audio�
• While muting, "
L The notification tone is not muted�
L Pushing [PTT] also releases the mute�
Transmits an Emergency call�
• Hold down the key until "Emergency" is displayed.
L The Emergency call is canceled when:
• A call is received�
• You hold down the same key until "Emergency" disappears.
• The transceiver is turned OFF.
• The time set in the Controller has passed�
Plays back the latest recorded audio�
While receiving, you can change the audio level to the level set in the Controller by
holding down the key�
] on the Standby screen�
CLR], and
CLR] or [MENU] key, depending on the Controller
Action
" is displayed.
[ CLR]
3-9
[MENU]
[ENT ]