Icom IP110H Operating Manual page 10

2
BASIC OPERATION
Transmitting and receiving
1. Transmitting a call
While holding down [PTT], speak into the microphone
at your normal voice level�
• The status indicator lights red while transmitting�
All call is selected�
[PTT]
Microphone
Calling tip:
Hold the transceiver 5 ~ 10 cm (2 ~ 4 inches) away
from your mouth, and speak at your normal voice
level� Talking too close to the microphone, or in a loud
voice, can distort your voice�
About the Time-out Timer:
When the continuous transmission period exceeds the
set period of time*, the Time-out Timer automatically
stops transmission to prevent an accidental prolonged
transmission�
Release [PTT], and then hold down again to resume
talking�
* Depending on the Controller setting�
About the key touch beep:
A confirmation beep may sound when you push a key,
depending on the Controller setting�
Lights red
2-2
2. Receiving a call
When a call is received, the audio is heard�
• The status indicator lights green while receiving�
Receiving an All call
About the alert:
The alert that indicates that you are out of the service
area, or receiving a call may sound, depending on the
Controller setting�
About the Vibration function:
The Vibration function may indicate that a call is
received, depending on the Controller setting�
About the Mute function:
You may be able to mute the received audio by
holding down [ CLR] or [MENU] for 1 second,
depending on the Controller setting� (p� 3-9)
L The notification tone is not muted�
Speaker
Lights green