Dinitializing The Pairing List Of The Transceiver - Icom IP110H Operating Manual

5
OPTIONS
Using a Bluetooth headset

DInitializing the pairing list of the transceiver

If you have problems with Bluetooth operation, initialize the pairing list, as shown below�
L All the paired Bluetooth devices are deleted from the pairing list by the initialization�
1� Turn OFF the transceiver�
2� While holding down [ENT
3� Release [ENT ] when the Standby screen is displayed�
4� Push [MENU]�
5� Push [▲]/[▼] to select "Settings," and then push [ENT
6� Push [▲]/[▼] to select "Bluetooth," and then push [ENT
7� Push [▲]/[▼] to select "Initialize," and then push [ENT
8� Push [▲]/[▼] to select "OK," and then push [ENT
• The pairing list is initialized�
9� Push [MENU]�
• Exits the MENU screen�
[ ]
], turn ON the transceiver�
[MENU]
[ENT ]
[▲]/[▼]
]�
]�
]�
]�
5-10