Casio CLASSPAD 330 3.04 User Manual page 244

Example: To run the program named OCTA that we created and stored under "Creating
and Saving a Program" (page 12-2-1) from the Main application, and determine
the surface area and of a regular octahedron with a side length of 20 cm
Cla Pad Operation
(1) Perform the key operation below in the Main application work area.
(2) Tap .
(3) Enter 20 and then tap [OK].
• This will run OCTA and display the results
in the program output window.
(4) To close the program output window, tap anywhere inside it and then tap the
in upper right corner.
2-13-2
Running a Program in the Main Application
Program output window
20060301
button