The calculation results of invGeoCDf are integers. Accuracy may be reduced when the
first argument has 10 or more digits. Note that even a slight difference in calculation
accuracy affects calculation results. If a warning message appears, check the displayed
values.
Example: To determine the minimum number of trials when
Menu Item: [Action][Inv. Distribution][invGeoCDf]
For more information, see "Inverse Geometric Cumulative Distribution" on page 7-11-22.
hypergeoPDf
Function: Returns the probability in a hypergeometric distribution that the success will
occur on a specified trial.
Syntax: hypergeoPDf(
Example: Determine the hypergeometric probability when
Menu Item: [Action][Distribution][hypergeoPDf]
For more information, see "Hypergeometric Distribution Probability" on page 7-11-23.
hypergeoCDf
Function: Returns the cumulative probability in a hypergeometric distribution that the
success will occur between specified lower value and upper value.
Syntax: hypergeoCDf(lower value, upper value,
Example: Determine the hypergeometric cumulative distribution when lower value = 0,
upper value = 1,
Menu Item: [Action][Distribution][hypergeoCDf]
For more information, see "Hypergeometric Cumulative Distribution" on page 7-11-24.
invHypergeoCDf
Function: Returns the minimum number of trials of a hypergeometric cumulative
distribution for specified values.
Syntax: invHypergeoCDf(
Important!
When executing the invHypergeoCDf function the calculator uses the specified
value and the value that is one less the
prob
(*
value) to calculate minimum number of trials values. The results are assigned to
xInv
the system variables
prob
using *
). The invHypergeoCDf function always returns the
xInv
xInv
when the
and *
showing both values.
2-8-56
Using the Action Menu
x
n
M
N
,
,
,
[ ) ]
n
M
N
= 5,
= 10,
= 20.
prob
n
M
N
,
,
,
[ ) ]
prob
(calculation result using
values are different, the warning message shown below appears
20090601
prob
= 0.875,
x
n
= 1,
= 5,
n
M
N
,
,
[ ) ]
value minimum number of significant digits
prob
xInv
) and *
(calculation result
xInv
pos
= 0.5
M
N
= 10,
= 20.
prob
value only. However,