U Ing The Stylu; Replacing Batterie And Setting Up The Cla Pad - Casio CLASSPAD 330 3.04 User Manual

3. U ing the Stylu

Slide the stylus from the slot provided for it on the ClassPad, and then use it to perform touch
panel operations.
Important!
• Be careful so that you do not misplace or lose the stylus. When you are not using it, always
keep the stylus in the slot provided for it on the ClassPad.
• Be careful so that you do not damage the tip of the stylus. A damaged tip can scratch or
otherwise damage the ClassPad touch panel.
• Use only the supplied stylus or a similar instrument to perform touch panel operations. Never
use a pen, pencil, or other writing instrument.
4. Replacing Batterie and Setting Up the
Cla Pad
Cla Pad Operation
(1) Making sure that you do not accidentally press the
ClassPad and then turn the ClassPad over. Remove the battery cover from the ClassPad by
pulling with your finger at the point marked
(2) Load the four batteries that come with ClassPad.
• Make sure that the positive (+) and negative (–) ends of
the batteries are facing correctly.
3
Getting Ready
key, attach the front cover to the
.
20060301
1