Connecting The Cla Pad To Another Device; Connecting To Another Classpad Unit - Casio CLASSPAD 330 3.04 User Manual

17-2 Connecting the Cla
Device
This section provides detailed explanations about how to connect the ClassPad to another
ClassPad unit, to a computer, and to a CASIO Data Analyzer.
Connecting to Another Cla
Use the procedure below to connect two ClassPad units.
Required Hardware
ClassPad: 2 units
Special SB-62 Cable: 1
Cla Pad Operation
(1) Turn both units off.
(2) Connect the data communication cable as shown in the illustration below.
• Insert both of the plugs securely, as far as they will go.
• For information about what you should do to transfer data, see "17-4 Transferring
Data to Another ClassPad Unit".
17-2-1
Connecting the ClassPad to Another Device
Pad Unit
Cable
20060301
Pad to Another