Table of Contents
Advertisement
When you want to do this:
Turn off graphing of the last regression
calculation results
Have Statistics View Window settings
configured automatically
Configure Statistics View Window settings
manually
Configuring StatGraph Setup
Use the procedure below to display the Set StatGraphs dialog box and configure the nine
StatGraph setups.
To di play the Set StatGraph dialog box
(1) On the Stat Editor window, tap [SetGraph] and then [Setting...].
• This displays the Set StatGraphs dialog box.
• There are tabs named 1 through 9, correspond to StatGraph1 through StatGraph9.
(2) Tap the tab for the StatGraph setup whose configuration you want to change.
(3) Configure the StatGraph setup settings you want as described below, and then tap [Set].
This will apply the settings for all nine StatGraphs.
• To exit the Set StatGraphs dialog box without changing any settings, tap [Cancel]
instead of [Set].
7-3-2
Before Trying to Draw a Statistical Graph
Tabs
20060301
Do this:
Clear the check box next to [Previous Reg].
Tap [Stat Window Auto] and then select
[On].
Tap [Stat Window Auto] and then select
[Off].
Advertisement
Table of Contents
