Casio CLASSPAD 330 3.04 User Manual page 307

To draw a vertical or horizontal line
Example: To draw a vertical line at
(1) While the Graph window is active, tap [Analysis], [Sketch], and then [Vertical].
• This displays "Vertical" on the Graph window, and the ClassPad waits for you to draw
the vertical line.
(2) Press .
• This displays a dialog box for specifying the
specified as the
• Instead of inputting a value here, you can use the stylus to tap the point through
which the vertical line should pass.
(3) Tap [OK].
• This closes the dialog box and draws the vertical line at
Tip
• To draw a horizontal line, tap [Analysis], [Sketch], and then [Horizontal] in place of [Vertical] in
step (1) of the above procedure. In the case of a horizontal line, you need to specify the
y
-coordinate in step (2).
To clear figure in erted u ing the Sketch menu
To clear plots, lines, text, or other figures inserted using the [Sketch] menu, tap [Analysis],
[Sketch], and then [Cls].
• This redraws the graph to what is stored on the Graph Editor window.
3-6-5
Using the Sketch Menu
x
= 2
x
-coordinate.
20060301
x
-coordinate of the vertical line, with 2
x
= 2.