Selecting A Number Base - Casio CLASSPAD 330 3.04 User Manual

Selecting a Number Ba e
Specifying a default number base in the Main application will apply to the current line
(expression/result pair), and to all subsequent lines until you change the default number base
setting. Use the number toolbar's base buttons to specify the number base.
To elect the number ba e for the line where the cur or i located
(1) Tap the down arrow button next to the
• This displays a palette of number base buttons.
(2) Tap the button that corresponds to the number base you want to use.
• To select binary, for example, tap
• The currently selected number base is indicated in the status bar.
(3) Execute the calculation.
• When you press
step 2 is also applied automatically to the next line. You can continue using the same
number base in the next line or change to another number base.
Important!
• A line for which a number base is not specified is called a "normal calculation line." To
return a line to a normal calculation line, tap
• Calculation results produced by a line for which a number base is specified are followed by
one of the suffixes listed below, to indicate its number system.
Number Sy tem
Binary
Octal
Decimal
Hexadecimal
2-7-3
Specifying a Number Base
button.
.
to execute the calculation, the number base you selected in
in step 2 of the above procedure.
Suffix
b
o
d
h
20060301
Normal
Binary
Octal
Decimal
Hexadecimal