Table of Contents
Advertisement
"library" Folder Variable
Variables in the "library" folder can be accessed without specifying a path name, regardless
of the current folder.
Example: To create and access two variables, one located in the "library" folder and one
located in another folder
Cla
Pad Operation
(1) With "main" specified as the current folder (the default), perform the following operation
to create a variable named "eq1" and assign the indicated list data to it.
{1, 2, 3}
eq1
(2) Keeping "main" specified as the current folder, perform the following operation to create
a variable named "eq2" in the "library" folder, and assign the indicated list data to it.
{4, 5, 6}
library \ eq2
Specifies the "library" folder.
(3) Check the contents of the two variables.
eq1
eq2
(4) Change the current folder specification to "Test".
• Use the Basic Format dialog box (page 1-9-4) or the Variable Manager (page 1-8-1)
to change the current folder specification.
(5) Perform the following operations to view the contents of variables "eq1" and "eq2".
eq1
main\eq1
1-7-8
Variables and Folders
Since this key operation does not access the
displayed without showing the variable contents.
20060301
Since variable "eq2" is stored in the
"library" folder, you do not need to
indicate a path to access it.
"main" folder, the variable name ("eq1") is
Specifying the path to the "main" folder
where "eq1" is located displays the
contents of the variable.
Advertisement
Table of Contents
