Casio CLASSPAD 330 3.04 User Manual page 508

Di playing the Mea urement of a Figure
You can display measurements on the Geometry application window. The measurements
change dynamically as you manipulate the figure.
A Li t of [Mea urement] Submenu Command on the [Draw] Menu
Name of Command
Angle
Supplementary Angle
Area
Circumference
Coordinates
Direction
Equation
Length
Radius
Slope
Note
There are three ways to display measurements while you work on the Geometry application
window. The following examples show you each method.
Method 1: Selecting [Mea urement] from the [Draw] menu
(1) Tap and select elements AB and AC.
(2) Tap the button to the right of the toolbar.
This displays the measurement box, which indicates
•
the specified angle.
8-2-22
Drawing Figures
Meaning of Each Command
Angle between two lines
Supplementary angle of extended lines
Area of selected figure
Circumference of selected figure
Coordinates of selected point
Direction of line or vector
Equation of selected curve
Distance between two points, or length of line
Radius of circle
Slope of line or vector
20060301