Required Software Configuration For Dedicated Hardware Platform - Motorola M68HC08 Reference Manual

User Guide
6.4.2.1 Application HC08 Software Files
NOTE:
Designer Reference Manual
118
Freescale Semiconductor, Inc.
For application PC master software (remote) control, the following
software is needed:
• PC master software for PC — installed on your PC computer
• Sensorless BLDC application PC master software control files
(located in bldc_zerocros08MR32\pc_master directory)
Both the HC08 and PC master software control files for the sensorless
BLDC application are delivered together in the bldc_zerocros08MR32
directory. It consists of files listed in
The application HC08 software files are:
• ...\bldc_zerocros08MR32\bldc_zerocross.mcp, application
project file
• ...\bldc_zerocros08MR32\sources\const_cust_hv.h,
definitions for software customizing for high voltage (230/115 Vac)
power board
• ...\bldc_zerocros08MR32\sources\const_cust_evm.h,
definitions for software customizing for EVM motor board (12 V
low power)
• ...\bldc_zerocros08MR32\sources\const_cust_lv.h, definitions
for software customizing for low voltage (12 Vdc) power board
Change the code_fun.c file to include (#include) one of const_cust_hv.h,
const_cust_evmm.h, or const_cust_lv.h files according to the hardware
platform used! See Table
Table 6-1. Required Software Configuration
for Dedicated Hardware Platform
Hardware
Platform
High-voltage hardware
User Guide
For More Information On This Product,
Go to: www.freescale.com
Application HC08 Software
6-1.
Dedicated
Customizing File
const_cust_hv.h
Required Software
Configuration
#include const_cust_hv.h
into code.fun.c
(done with default software
setting)
DRM028 — Rev 0
MOTOROLA
Files.