Technical Specifications - WisyCom MTP60 User Manual

MTP60 User Manual
Frequency ranges
Switchable channels
Switching-window
Frequencies
Frequency error
RF Power
Antenna connector
Modulation
Nominal deviation
Peak deviation
Spurious emissions
Telemetry feature
Noise Reduction system
AF bandwidth in NarrowBand
mode (NB)
AF bandwidth in WideBand
mode (WB)
Distortion
SND/D ratio (Analogue)
Audio input connector
Audio input level
Max input level
Managing interface
LED
Battery lifetime indication
PTT function
Display
Power supply
Power consumption
Temperature range
Dimensions
Weight
8

TECHNICAL SPECIFICATIONS

from 470 to 1075 Mhz, depends on the country (see Configurations)
2400 managed in 40 groups ofr 60 frequencies completely user customizable
Up to 362 MHz, depending on band (see Configurations)
Quartz PLL frequency synthesizer circuit (25 kHz step)
±2.5 ppm, in the rated temperature range
switchable typ. 20 mW/ L20 mW / 50 mW /100 mW
note: in some countries high power can be disabled, for local norm!
LEMO-F 1 pin
wideband/narrowband FM, with digital audio conditioning (FPGA)
±40 kHz Wideband / ±25 kHz Narrowband
±56 kHz Wideband / ±35 kHz Narrowband
< 2 nW
TX transmits also a digitally modulated sub-carrier, suitable for:
• tone-squelch operating
• remote battery monitoring
• optional PTT (push to talk) operation
ENS - Wisycom Extended-Sound Optimized
Audio frequency response (dBa):
• 45 Hz - 17 KHz (3dB)
Audio frequency response (dBa):
• 45 Hz - 20 KHz (3dB)
< 0.3 % (0.15 % typ.)
typ. 115 dB (A)rms with 40 kHz deviation; typ. 121 dB (A)rms with 56 kHz deviation Wideband
typ. 115 dB (A)rms with 25 kHz deviation; typ. 121 dB (A)rms with 35 kHz deviation
Narrowband
LEMO 3pin
from -36 dBu (12mV RMS) to 26 dBu (15.5 V RMS) adjustable in 1 dB steps
+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Bluetooth 5 long range, USB-C, IrDA
2 RGB LEDs indication with (red, green and blue)
LED 1
• Green unit is modulating regularly
• Red Flash when clipping
• OFF (grey) if it doesn't modulate
• Fixed RED when recordin in ON
10 steps
Pin 3 of the AF connector can be setup to an external push button
High contrast OLED white display (128 x 64 pixels)
2 x AA battery, KLIC8000 lithium (5.6 Wh) or NiMh
250mA@ 2.6V average (display off, 100mW power)
-10 - +55 °C
75,7mm x 61,4mm x 19mm (HxWxD) without clip
Approx. 91 g. without batteries (133 g. with batt.)
LED 2:
• Fixed Red with RF OFF
• Fixed Green with RF ON
• Blinking RED when battery is dicharging