Subscribe to Our Youtube Channel
Related Manuals for WisyCom MTP61
Summary of Contents for WisyCom MTP61
- Page 1 MTP61 U anUal UlTi band ireless rofessional iniaTUre ransMiTTer Rev.01 (ref. FW 1.4.0) Date: 28th August 2023...
-
Page 2: Product Overview
MTP61 multi-band miniature transmitter PRODUCT OVERVIEW 1. OLED white display (128x64 px) 6. LED1 for audio 2. 4 setup buttons 7. LED2 for RF and battery 3. MIC connector (LEMO 3pin) 8. LED3 for recording 4. Antenna connector (SSMA) 9. battery compartment 5. -
Page 3: Led Indications
(grey) when MTP61 is OFF • LED 3 - recording (grey) when recording is OFF when recording is active When MTP61 is inserted in BCL61 battery charged: • LED 1 - recharging status (grey) when no recharging Green when is recharging... -
Page 4: Status Menu
Push SEL+UP buttons to enter on the Setup menu. Using UP/DOWN button all menus can be accessed in sequence and change the parameters value. Each change is immediately set on MTP61, it is not necessary to confirm the modification. Push EXIT button to exit from menu. -
Page 5: Quick Setup
LEMO 3pin connector • power on the MTP61 • enable BT sync and syncronize with Wisycom receiver • connect the correct antenna (see code on RF > Antenna menu) • set Mic Mode (Audio > Mic Mode menu) •... - Page 6 MTP61 multi-band miniature transmitter Yes/No Mode Wisycom Pairing Yes/No Passcode Yes/No Reset Dev … Name Transmitter (8 char) Battery % / time SETTINGS Brightn. OFF, from 1 to 5 Mode Full/Alarms/PTT Brightn. from 1 to 5 from 5 to 60 sec Display from 10 to 120 sec (10 sec step) / OFF Direction Up/Down Auto‐lock 60 sec/30 sec/15 sec/OFF Version v1.4.0 v1.3.0 vX.Y Serial 09900004 Range 470‐1075 Band ...
- Page 7 Use L10 or L20 levels to set 10 mW or 20 mW of power *The transmitter is factory programmed with a power profile capable of complying with the regulations in force in the country of sale of the MTP61.
- Page 8 Narrowband or Wideband. This reduces or expands the spectrum occupation of the MTP61 Transmitter. When the transmitter is set to WideBand the audio bandwidth is limited to 20 KHz and the peak deviation is set to ±56 kHz so that the occupied bandwidth is approx.
- Page 9 If PTT is set to Mute, the audio is muted when the Push to Talk button is pushed. If PTT is set to ON, Wisycom receiver is able to do an audio routing according to Tone squelch matrix set on the receiver (see receiver user manual for more details).
- Page 10 RECORDING MTP61 is equipped with 64 GB micro SD memory card (industrial grade heavy duty). The MTP61 records on SD card exFAT formatted. To format the card enter on the “Recorder > SD Card > Format” menu.
- Page 11 Use arrows to move the cursor between START/STOP and JAM function. Push SEL button to activate the function. The MTP61 records 32-bit float RF64 WAV (over 4 GB) files at 48 kHz sampling rates. Bit Depth can be change to 24 bit using “Recorder > BitDepth” menu.
-
Page 12: Audio Connector
(voltage, temperature and alarms). BATTERY MTP61 works with Lithium-ion battery Model CS-BCE10 Part No. CGA-S008E (3.7V, 1050 mAh) Battery status can be checked on internal OLED display or looking the LED2 status on front. -
Page 13: Technical Specification
Telemetry feature • remote battery monitoring • optional PTT (push to talk) operation ENS - Wisycom ultra-high permorfmance compander Noise Reduction system Audio frequency response (dBa): • 45 Hz ÷ 17 KHz (3dB) in NarrowBand mode (NB) AF bandwidth •... - Page 14 • 2 Lithium battery Model CS-BCE10 • 1 wire belt clip (BCLW61) • antenna kit: according to the configuration of MTP61 the following kit antennas are supplied: MTP61-US and MTP61-CA MTP61-UK2 AWSS-507 (470-547 Mhz) AWSS-552 (510-595 Mhz) AWSS-590 (548-663 Mhz)
-
Page 15: Manufacturer Declarations
MTP61 multi-band miniature transmitter MANUFACTURER DECLARATIONS In compliance with the following requirements: RoHS Directive (2002/95/EC) WEEE Directive (2002/96/EC) Please dispose of the diversity transmitter at the end of its operational lifetime by taking it to your local collection point or recycling center for such equipment Battery Directive (2006/66/EC) The supplier batteries or rechargeable batteries can be recycled. - Page 16 (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter IC: 11967A-MTP61 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated.
-
Page 17: Safety Instruction
Info > STD (regulation standard). Before putting the device into operation, please bserve the respective country-specific regu- lations! * MTP61-EUX is not an SRD device, thus it requires specific authorization by your local frequency authority! SAFETY INSTRUCTION •... - Page 18 MTP61 multi-band miniature transmitter...
- Page 19 MTP61 multi-band miniature transmitter...
- Page 20 WisyCom srl Via Tiepolo, 7/E 35019 Tombolo (PD) – Italy VAT# IT02765640244 Tel. +39 0424 382605 e-mail : sales@wisycom.com...
Need help?
Do you have a question about the MTP61 and is the answer not in the manual?
Questions and answers