Canopy Hatch Installation; Blade Badge Installation - Casablanca Bella Bellatm Bella Ceiling Fan Owner's Manual

Bella oman rev-a 05 owners manual

Hide thumbs

Table Of Contents

Table of Contents

Step 5. Tuck the wires into the canopy

with the wire nuts pointed upwards, so

that the WHITE and BLACK wires are on

opposite sides of the canopy and all wires

are clear of the canopy opening.

Step 6. Install canopy hatch with the last

canopy screw and lock washer. To do this,

tilt the fan body away from the hatch

opening.

Tighten the screws firmly by hand only,

Step 7. Straighten the fan, then check

to ensure that there is no movement be-

tween the canopy and ceiling or Hang-Tru

ball and top support shaft.

BLADE SCREW

(4 PER BLADE)

BLADE HOLDER

SCREW

(2 PER BLADE)

Step 8. Attach the blades to the blade

holders by first pressing the blade badge

into the blade, then installing the blade

holder using the four blade screws and

flat washers provided for each blade.

Using the screwdriver, tighten securely

by hand only.

Repeat for each blade assembly.

Step 9. Remove the blade access plate

next to the light fixture. Set aside the

two screws and the plate—they will be

reinstalled later.