Advertisement
CY22 Moterra Neo
Cleaning Your Bike
When cleaning your bike:
USE ONLY A MILD SOAP AND WATER SOLUTION. Clean water and a common dish
washing liquid will work best.
COVER SENSITIVE AREAS WITH A CLEAN PLASTIC BAG. Secured temporarily with a
rubber band or masking tape, a bag can prevent water damage to various bike components
(e.g., bearings, electrical controls, connections and sensors, seals, and fork/shock adjustment
features).
SPRAY OFF BEFORE WIPING. To preserve the appearance of paint, finish, and decals, use a
low pressure water hose to first spray off heavy soils and dirt.
CLOSE ALL COVERS.
NOTICE
DO NOT power wash or spray water under high pressure to clean. Power washing will force
contaminants into parts where they will promote corrosion, immediately damage, or result in
accelerated wear.
DO NOT use compressed air to dry.
DO NOT use abrasive or harsh chemical cleaners/solvents which can damage the finish or
attack and destroy both the outside and internal parts.
When rinsing, avoid directing the spray directly at shock/fork adjusters or bearings.
Power-down the drive system and detach both the main and any extended range batteries
from the frame before performing cleaning or any work to the bicycle.
Do not clean the bicycle while connected to the charger. Move the bicycle to an area away
from sources of electrical energy or electric appliances.
138688 Rev 1 (04/22)
Record
40
Maintenance
Cleaning Your Bike
Advertisement
