Advertisement
CY22 Moterra Neo
Sleeve and Nylon Anti-Wear Wrap
For internal headtube routing headset:
CABLES/SLEEVE/ANTI-WEAR WRAP: When servicing this bike, first be very careful to make the
bundle of wires and brake lines as compact as possible. When replacing wires and/or brake lines be
very careful with measuring and cutting lengths. The important goal is to make a compact bundle
that minimizes contact or rubbing between the bundle and the sleeve on the steering tube. The
sleeve is required. Second, after making a compact bundle that minimizes contact or rubbing
between the bundle and the sleeve on the steering tube, then add the anti-wear wrap. The anti-wear
wrap is additional protection, not a substitute for proper, careful set up of wires and brake lines.
INSPECTION: A carefully inspection of all cables, wires, anti-wear wrap, sleeve, headset parts,
frame interior, and the fork steerer should be performed regularly by a professional bicycle
mechanic every 6 months. If any damage or worn parts are found during the inspection,any
contributing factor must be corrected and any damage parts must be replaced with new parts. The
frame headtube and downtube must also be inspected for cable rub wear as part of this process.
YOU CAN BE SEVERELY INJURED, PARALYZED, OR KILLED IN AN ACCIDENT IF YOU IGNORE
THESE WARNINGS.
Top headtube
Anti-wear wrap
to this point.
138688 Rev 1 (04/22)
Inside headtube
top
Anti-wear wrap
through headtube
20
Technical Information
Routing - Carbon
Inside downtube
Anti-wear wrap
past upper clamp
Advertisement
