Advertisement
Battery Charging Port
The battery charging port (1) is located on the
left side of the seatube.
The charging port enables the battery to be
charged with the battery installed in the
bicycle.
To connect to the charger cable to the port
connector:
1.
Place the bike and charger in a secure area
where both will remain undisturbed while
the battery is charging.
2. Lift up the cover latch (1) and lower the
cover (2).
3. Attach the specified charging cable to the
connector (3). Follow the manufacturer's
charging instructions for the duration of
charging.
4. Disconnect the charger cable from the
port close the cover and the latch.
5. Disconnect the charger from its source of
power.
Follow the drive system manufacturer's
instructions for charging and handling the
battery.
Be sure to inspect the condition of the
battery in accordance with manufacturer's
specifications before charging.
Do not insert objects other than the
charge plug into charging socket (a).
Incorrect charging or handling can result
in a fire or explosion, resulting in serious
injury or death.
NOTICE
Always make sure the port cover is closed
and latched when the charging cable is not
inserted.
25
Technical Information
Battery Charging Port
Advertisement
